Top Plumbing Tools Every Home Needs To Have on Hand

If you are a homeowner, chances are you have had to deal with your share of plumbing problems. While you can always call Diamondback Plumbing to take care of your plumbing needs read on for a few handy tools that every home should have on hand in case of plumbing emergencies.


A plunger is the most basic plumbing tool you can keep in your arsenal. Pretty much everyone has used one of these before. Plungers consist of a rod with a rubber cup-like device on the end. The cup is designed to create a seal on a drain, most commonly in a toilet.

The plunger is used to create a pushing and pulling action in a clogged pipe. In most cases, this is a quick and easy fix for general debris buildup in a pipe that is preventing water flow. Most clogs are simply caused by detritus that has caught on the side of the drain and cannot be pushed down. The plunger’s sucking action can usually pull the obstruction off of whatever is catching it, giving it another chance to flow freely down the drain. The plunger presents an easy fix for the most common plumbing issue.

Complete Set Of Wrenches

Diamondback Plumbing - Plumber Tools PhoenixWrenches are used in almost every aspect of plumbing. Whether you are fixing a leaky faucet, taking apart pipes under your house, or anywhere in between, chances are there will be a bolt that needs a wrench to be loosened or tightened. A set of wrenches is an essential aspect of any toolbox, but is especially important for plumbing. (Channelocks)

Drain Snake

While a plunger provides a quick and easy fix for most clogs, some clogs are too extreme for a simple plunger to handle. If your drain is seriously stuck, and neither a plunger nor a bottle of drain cleaner can make it drain properly, a snake is required for the next step.

A snake is a flexible but strong metal device designed to be wound out into a drain and dig through obstructions. While these machines will take care of your problem they will also damage your piping and make you problem much worse if you are not experienced.  Too many times we have seen where the customer has went to Home Depot to rent a machine pay upwards of 50.00 only to damage the piping and make an extreme mess of black sludge inside their cabinetry. These machines can cause injury if not properly used and furthermore if you damage or kink the inner core cable which is very easy to do you will get charged additional cost from the rental facility.

Do not waste your time and money attempting to rent equipment and do it yourself – in most cases the cost is only an additional $40-50 dollars more to have a professional handle it.

If you need emergency plumbing assistance, get in touch with Diamondback Plumbing today.

For over 20 years, Diamondback Plumbing has been the local leading plumbing service company that has established themselves as the most trusted plumber in Phoenix. We are well known for providing our residential and commercial customers great service and reasonable pricing.

DiamondBack Plumbing
17423 N 25th Ave
Phoenix, AZ 85023
(602) 674-3255


The following post Top Plumbing Tools Every Home Needs To Have on Hand was first published on owner of Diamondback Plumbing Steve Herzog

Top Plumbing Tools Every Home Needs To Have on Hand first appeared on:

Diamondback Plumbing

17423 N 25th Ave

Phoenix, AZ 85023

(602) 674-3255

Google Maps

Removing Rust Stains and Calcium Buildup

Been doing your best to keep your house in pristine condition, but can’t seem to get rid of those reddish and yellowish stains on your sink and toilet? The former is most likely rust stains while the latter is calcium build-up. They can’t just be scraped or washed away like normal stains. Luckily, there are more than enough ways to remove them.

Rust (also known as iron oxide) forms when iron is exposed to oxygen through water and calcium buildup and it occurs when the water has a high pH level, high calcium concentration, or high alkalinity. Thus,areas that are constantly exposed to water are prone to rust stains and calcium buildup. Your faucets, sinks, and toilets are the most vulnerable to rust and calcium buildup since they almost always have water running through them.

Beyond harming your house’s appearance, rust stains and calcium buildup can cause health issues — especially to sinks and faucets since you use them to wash dishes, your hands and your body.

While having rust stains and calcium buildup is highly annoying and unsanitary, there are multiple ways to clean and restore them. Most rust and calcium buildups occur in the bathroom and kitchen fixtures.


Rust Stains

Rust is known to be easily removed by vinegar alone. This is because acids like vinegar takes the rust off metals while minimally “harming” the metal itself. Other acids that can also safely remove rust from metallic objects include lemon or lime juice and apple cider. Soaking things in cleansers with high acidic content will remove rust after a few hours. Acids have different pH levels though, so the stronger an acid is, the more efficient it is in removing rust.

For sinks, you can easily fill it with any acid — vinegar is the most common and most recommended — to a level where it reaches the rust stains. You can leave the acid-filled sink for a few hours or overnight and return to a rust-free sink. If your sink is too large or you don’t want to leave it full of acid for a long period of time, you can rinse as soon as you’re done scrubbing and cleaning.

Unlike sinks, toilets and faucets cannot be exposed to acid. Instead, one should use hydrochloride acid (also known as HCL or muriatic acid) which is a stronger cleansing agent than any of the aforementioned acids. You will have to pour hydrochloride acid over the rust stains and scrub the area to rid it of any stains. Make sure the water isn’t running while cleaning as this may cause the acid to splash and damage your surroundings or even yourself if unprotected. Once done, rinse immediately and thoroughly to remove any traces of hydrochloric acid. (It is best to use rubber gloves and old clothes to help prevent injury to yourself or damage good clothes).

Using baking powder is another popular method of removing rust. However, this only works for dry objects. Removing rust stains on faucets, toilets, and sinks with baking powder is less than ideal since they are almost always in contact with water. You will have to dry them up completely before spreading baking powder on the surface and scrubbing with steel wool. Electrolysis — using battery power — can also be conducted to remove oxidation (i.e. rust), but this is usually done on smaller objects such as tools and not recommended for newbie or amateur DIY’ers since it’s quite a complicated process.


Calcium Buildup

Phoenix Arizona drain cleaning serviceLike rust stains, calcium buildup on different surfaces can be treated with different acids (e.g. vinegar, hydrochloric acid). There are also other practical solutions for removing calcium buildup. Other than using acids and acid-based products, you can use a pumice stone. Pumice stones work great on porcelain stains just make sure there is constant water on the area you are scrubbing. A pumice stone is used to remove the calcium buildup and then smoothen out the surface. Using a pumice stone is a little more risky than the other two as it involves manual labor and its effectively and efficiency are dependent on the cleaner’s skills.

Commercial calcium deposit removers are products made specifically to remove calcium deposits on different surfaces such as toilets, sinks, swimming pools, and the like.They come in different forms such as sprays or foaming cleansers as well.

While rust is inevitable, calcium buildup is highly avoidable. Calcium buildup occurs when there is an irregularity with your water such as alkalinity, pH level, or calcium content. Fixing these factors will result to lesser calcium buildup or may prevent calcium buildup at all. Using a water softener will lessen the calcium content in your household’s water, reducing the potential for calcium buildup significantly.

While there are a few ways to combat rust stains and calcium buildup, it’s always best to leave household problems like these to experts and professionals,especially for harder-to-reach regions of your house. Diamondback Plumbing can help you with rust & calcium build-ups amongst many other plumbing services we provide. (Read more about our services)

We have a well known reputation as professional plumbers in Arizona and have had great success due to our return customers that keep using and coming back to Diamondback Plumbing. They know they can trust us due to having a solid reputation and a well known name in the plumbing industry serving Phoenix for over 20 years.


Removing Rust Stains and Calcium Buildup is courtesy of home page Diamondback Plumbing

Removing Rust Stains and Calcium Buildup first appeared on:

Diamondback Plumbing

17423 N 25th Ave

Phoenix, AZ 85023

(602) 674-3255

Google Maps

3 Basic Plumbing Tips New Homeowners Should Know About

Owning a home requires a lot of work. Whether it’s maintaining your plumbing, cleaning your floors, or inspecting your roof. You don’t want to have to rely on a professional for every small problem that you encounter. That’s why it’s a good idea to understand the basics of some of these tasks. Here are three simple plumbing tips that new homeowners need to learn.

We have built a solid reputation providing all of our customers with the best possible plumbing service at competitive prices. This reputation has been built on customers having a great experience with Diamondback Plumbing and they keep coming back for any plumbing needs and concerns they have.

  1. How To Shut Off The Water To The Home

The first plumbing tip that every homeowner needs to understand is the location of the main shut-off valve for the home. Turning this valve will prevent any more water from entering the home’s plumbing system from the outside supply feed. Each house in the country is required to have one of these valves. It’s important to know where the valve is and how to use it.

The exact location of the valve is going to vary based on the size, location, and age of your home. The best way to find it is to walk outside and look at where the outside hose spigot is – usually the shut off valve is directly under the spigot. The service riser that houses this shut off valve is usually on the street side of the residence for reference if you are looking for your valve. By turning the handle you can completely shut off all incoming water. There is either a round handle that you would rotate clockwise or counterclockwise or a lever valve that you would pull up or down.

Closing off this valve is one of the first steps when you encounter a plumbing problem. If there are leaking pipes in the walls, then the only way to stop water from entering those pipes is by shutting off the water at this location.

  1. How To Shut Off Water To Certain fixture locations

If a sink or dishwasher is leaking, then you don’t necessarily need to shut off the water at the home’s main valve. Sinks, dishwashers, washing machines, toilets, and most appliances that use water have their own independent valves. The turn off valves are called angle stops these valves let you control the on off isolation of the particular fixture it serves.

These valves are often located very near to the appliance they are used for. The shut-off valve for a toilet is often against the wall near the bottom of the toilet. For the sink, the valve is often in the cabinet beneath the sink. A washing machine valve is most likely behind or beside the washing machine.

These valves make it possible to make repairs, replacements, or modifications to the appliances without turning off the water at the main valve. For example, if the sink the bathroom is leaking, but can’t be fixed for several days, then you can shut off the valve at the sink and the rest of the house will still have water. Please note that if these valves do not turn freely do not force them as they will snap causing a much more larger flood problem than as if you left it alone. If they do not turn freely or leak behind the handle when turned you should call a plumber to schedule a replacement usually replace both the hot and cold at the same time.

  1. Know What Goes Where

It’s easy to view sinks, toilets, and garbage disposals as drains that will carry away whatever you put in them. In reality, a lot of things can get stuck in the piping and lead to serious problems. Clogs can result in toilets or sinks that no longer work. In worst case scenarios, the pipes can break and serious flooding can occur.

The power of the garbage disposal is often overestimated.  There are some items that you should never put into a garbage disposal even if its food leftover on a plate. Some of those items include bones, pasta, egg shells, coffee grounds, and grease.

Many homes across the country have dealt with clogged pipes because of grease. Grease should never be poured into any sink, toilet, or garbage disposal. Grease is best disposed of in a closed container and thrown into the trash.

Remember The Basics

These plumbing basics are enough to reduce the risk of any serious damage to your home due to plumbing failures and errors. Be careful of what you place in your drains or disposals. If a leak does occur, then use the nearby shut off valve or the home’s main shut off valve. And remember not to block these areas so that you will have easy access if an emergency occurs.

DiamondBack Plumbing The Plumbing Professional
17423 N 25th Ave
Phoenix, AZ 85023
(602) 674-3255

The blog post 3 Basic Plumbing Tips New Homeowners Should Know About was first published on Dback Plumbing

3 Basic Plumbing Tips New Homeowners Should Know About first appeared on:

Diamondback Plumbing

17423 N 25th Ave

Phoenix, AZ 85023

(602) 674-3255

Google Maps

Common Causes of Toilet Clogs

A toilet clog is one of the trickiest and most embarrassing plumbing concerns. There are a variety of causes for a toilet to clog and back up. Knowing these reasons will help you prevent your toilet from clogging in the future. Here are some of the more common culprits of toilet clogs.


Flushing Down the Wrong Stuff

plumbing repair in PhoenixThe main reason for toilet clogs is flushing of non-flushable objects. While the toilet is built to flush human waste, most are guilty of flushing items (such as excessive toilet paper, wet wipes, feminine hygiene products, and others) that can restrict proper water flow in the drain line and cause toilet backups.

The best way to address this concern is to set a strict rule in your household about which things are safe to flush and which are not. Placing a trash bin next to your toilet will also encourage proper waste disposal.

Human hair can also clog a toilet. Although this could easily be remedied by a chemical solution, excessive blockage of the toilet may require the help of a plumbing professional. Diamondback Plumbing can help you with all your bathroom plumbing needs.

Diamondback Plumbing has been providing service in the residential and commercial sector for over 20 years with a well known reputation for great service and competitive pricing.


Clogged Trap

If your toilet won’t flush, it could be because the trap is clogged. The trap is the U-shaped curved pipe found below the toilet. It blocks foul odors and gases from the sewer line from entering the home.

Since this part of the drainpipe is curved, it is prone to clogging. Items that are difficult to flush, such as excessive toilet paper or baby wipes can clog up the trap. Using a plunger usually clears the trap.


Blocked Plumbing Vent

Oftentimes, if the toilet’s drainpipe is not the clog culprit, then the toilet’s vent may be blocked. Toilet roof vents help fresh air to circulate into the plumbing system to increase flushing pressure.

Since toilet vents are openings on the roof, it is susceptible to be clogged by leaves, twigs, and other debris. When this happens, the flushing pressure is decreased, causing the drains to stop and the toilet to clog. Clearing out the toilet vent should be consulted with a plumbing professional to prevent further damage.


Use of Older Low Flow Toilets

While low-flow toilets use less water, an older version of a low-flow toilet may be the reason why your toilet is backing up. Older low-flow toilets may have weak flush pressure that is not enough to suck up waste for every flush.

A professional plumber can help you with toilet clogs caused by low-flow toilets. However, should you have persistent toilet clogs, you might want to consider replacing your toilet with a more efficient one.


Sewer Line Problems

If the toilet, drainpipes, trap, and vent are not blocked, chances are, the sewer may be the cause of the problem. Debris in the sewer line can potentially cause blockage.

Since sewer lines are placed underground, there are other reasons for sewer line problems aside from pipe blockage. Even tree roots can be the culprit. Too much pressure or weight being carried on top of the sewer line may cause them to break.

Sewer-related concerns not only affect your toilet but can also cause major issues to your home. For these complicated concerns, it is advisable to hire a professional plumber like Diamondback Plumbing that specializes in sewer drain cleaning.

Each cause of toilet clogs has its own solution. Most clogs can be avoided through regular maintenance and checking. Simply plunging the toilet can clear up minor clogs. However, there are stubborn clogs that would require more than just a plunger.

When these difficult situations happen, you can call on your local plumber for help. The professional plumbers at Diamondback Plumbing can help you unclog your toilets with their high quality workmanship. Help for your plumbing concerns is only one call away — get in touch with Diamondback Plumbing at (602) 674-3255.

The blog post Common Causes of Toilet Clogs was originally published to (Diamondback Plumbing in Arizona)

Common Causes of Toilet Clogs first appeared on:

Diamondback Plumbing

17423 N 25th Ave

Phoenix, AZ 85023

(602) 674-3255

Google Maps

How a Camera Inspection Can Help With Drain & Pipe Problem Prevention

Plumbing emergencies can occur anytime in your home or business. There are many instances that we use video camera inspections and detection to find the root cause of problems in your drains and plumbing pipes.


Diamondback Camera Inspection

At Diamondback Plumbing, we have the correct tools to ensure your plumbing will work as you would always expect it to work. To make sure your plumbing will always be clear, clean, and functional, our professional plumbing technicians will perform a thorough inspection using highly efficient cameras. Even if you are just looking for a repair or an installation, we would suggest inspecting the entire system – exterior and interior – for bigger problems that might occur in the future.


When Should a Video Camera Inspection Be Considered

Plumbing systems are complicated and usually, it is hard to understand how the system works or where the problem is stemming from.

If you are not so sure, consider calling our technicians. But before you do so, here are some warning signs to check.

  • Slow drains – If it is just one plumbing fixture like the sink or the toilet, you can say that it is just a minor issue in your system, but if there are many fixtures that are not draining well, then you can be dealing with a sewer blockage or too much waste material. A camera inspection can be considered.
  • Presence of pests – Bugs and rats are not only a health menace; they are also a sign that your system has cracks. A camera check can determine if there are cracks inside and immediate sealing is needed.
  • Water bills drastically increasing – Hidden plumbing leaks can cause your bills to soar. A camera inspection will be able to detect where these leaks are. Act immediately because unseen leaks can weaken the structural foundations of your home.
  • Foul smell – Plumbing systems are designed in such a way that no air or gas will be returning back to the interior of your home. If you are experiencing this, there is a leak somewhere.
  • Sewage backup – Flushed water returning to the toilet bowl, or water and food waste not going down the sink drain is a sign there’s trouble in the sewer or the drainage in the street.

Mold buildup is another sign. Check if a leak is causing it. Is the grass in the garden looks healthier than usual? It can be also caused by leaks. Check the septic tank as well. Tree root blockage is also a common cause of plumbing problems.

For over 20 years, Diamondback Plumbing has been the local leading plumbing service company that has established themselves as the most trusted plumber in Phoenix. We are well known for providing our residential and commercial customers great service and reasonable pricing.

Camera Inspections – What’s the Advantage?

A camera inspection will ensure that all problems can be detected in your lines. After the inspection, we will talk to you about the results and discuss for resolutions if we found problems or for tips to maintain your system if we didn’t find any issues.

Using a camera for inspection comes with the following benefits:

  • No room for doubt – You want to make sure everything’s okay inside and that nothing will cause you serious problems in the future. This is for your peace of mind.
  • Prevent future issues – Our technicians will tell you the current condition of your system. You can implement early remedy for brewing issues.
  • Less labor, less expense – Using a camera for inspection will not require technicians to dig into the soil or break some parts of the system. We will just insert the camera and give you the results within a short period.

To start the process, a waterproof camera will be attached to a sewer cable. Then we will insert the device into your lines with lengths sufficient enough to reach the farthest parts of these lines.

This is also the time that you can check whether or not the plumbing system can still be relied on for many years to come. It is therefore advisable to do a plumbing camera inspection for those considering having a major overhaul of their homes. Call Diamondback Plumbing today to schedule an appointment at (602) 674-3255.

How a Camera Inspection Can Help With Drain & Pipe Problem Prevention was first published on

How a Camera Inspection Can Help With Drain & Pipe Problem Prevention first appeared on:

Diamondback Plumbing

17423 N 25th Ave

Phoenix, AZ 85023

(602) 674-3255

Google Maps

ABS, PVC, PEX or Copper? Which is Better for your Home?

Most people might not even think about them, but the choice of plumbing materials that you use for your home matter, quite a lot actually. Currently, the most popular choices when it comes to plumbing are ABS and PVC plastic pipes for drainage material and PEX or copper for water distribution piping. Now, if you are thinking of giving your kitchen or bathroom a remodel and you are considering replacing the old plumbing with new pipes, which one of these are your best choice and why?


ABS Pipes

ABS stands for Acrylonitrile-Butadiene-Styrene, which is a thermoplastic resin. These pipes were originally developed to be used in the oil fields and chemical industry in the early 50s. The strength and durability of this material was proven when a popular Arizona builder, John F. Long, used ABS pipes for an experimental residence. After 25 years, a team of independent researchers dug up a section of the plumbing and analyzed it, and they found no trace of rust, rot, or any kind of corrosion whatsoever. ABS piping is for drain piping only and is not used for potable drinking water. Whenever a house is found to have cast iron from the 50-60’s any repairs are typically replaced with ABS piping

Pros and Cons of ABS


  • Easier to install compared to metal pipes
  • Less expensive
  • Superior flow rate thanks to the smooth interior
  • Does not erode like steel metallic piping such as cast iron


  • Cannot be used outside as exposed piping
  • May bow or sag if not installed properly
  • Drain waste and vent use only



PVC Pipes

PVC, or Poly-Vinyl Chloride pipes have been in use far longer than ABS pipes. In fact, the first city-wide implementation of PVC pipes for drinking water and sewer pipes was from 1936 to 1939 in Central Germany. Amazingly, most of the original plumbing used back then (minus the ones that were damaged during World War II) are still being used today. In retrospect, the manufacturing process used for making PVC piping back then was still crude, but they still managed to produce tough and resilient pipes. These days, the use of PVC piping has made way

It way into several industries such as irrigation / water distribution / drain and vent piping. Schedule 40 PVC is the rating required under most code requirements

Pros and Cons of PVC


  • Multi use allowancs
  • No rust / metal deterioration


  • Cannot be used as exposed piping on exterior for water distribution
  • Stress cracks over time / professional installation required to ensure proper bonding


Copper Pipes

Copper pipes began gaining popularity after World War II. Before, lead was the most popular choice for plumbing materials, mainly because it was easy to bend, seal and was relatively cheap. However, when the dangers of lead poisoning came to light, households started using copper plumbing instead. Because it is also a metal, it was much easier for older households to transition to using copper rather than plastic plumbing since the fittings were relatively the same.

Pros and Cons of Copper Pipes


  • The ductility of copper allows it to be shaped into different angles, removing the need for elbow joints
  • Can withstand huge amounts of pressure, exponentially more than the normal working pressure of household plumbing
  • Copper pipes are quite aesthetically pleasing so you can leave them exposed if you want and are also allowed as exterior and underground buried installation


  • Expensive
  • Labor intensive installation and repairs
  • May leave a slight metallic aftertaste in drinking water (it is just the taste that is affected, copper is still non-toxic)
  • Hard water can cause accelerated rapid deterioration


PEX Piping

PEX tubing is made from crosslinked HDPE (high density polyethylene) polymer. The HDPE is melted and continuously extruded into tube. The crosslinking of the HDPE is accomplished in one of three different methods.

PEX plumbing has been in use in Europe since about 1970, and was introduced in the U.S. around 1980. The use of PEX has been increasing ever since, replacing copper pipe in many applications, especially radiant heating systems installed in the slab under floors or walkways. Interest in PEX for hot and cold water plumbing has increased recently in the United States.

Pex material is the most widely used piping today for new residential construction – since it was introduced over 30 years ago it has become the largest supplier of water distribution piping.

The styrene rubber material makes it very flexible for ease of installation and ability to handle hot and cold distribution as well as high water pressures.

EX (or crosslinked polyethylene) is part of a water supply piping system that has several advantages over metal pipe (copper, iron, lead) or rigid plastic pipe (PVC, CPVC, ABS) systems. It is flexible, resistant to scale and chlorine, doesn’t corrode or develop pinholes, is faster to install than metal or rigid plastic, and has fewer connections and fittings.

Pros and Cons of Pex Piping


  • Easier to install compared to metal pipes
  • Less expensive
  • Superior flow rate thanks to the smooth interior
  • Does not erode like steel metallic piping such as cast iron


  • Cannot be used outside as exposed piping
  • Requires professional installation or warranty is voided


Which One Should You Choose?

Talk to a licensed professional to discuss your project and or application as all the above piping materials has a place at the different phases of a home or building.

Diamondback Plumbing has been serving Arizona for over 22 years and has a team of skilled and experienced plumbers who are trained to deal with various kinds of plumbing issues. The main reason for our longevity and success is return customers – we have built an outstanding reputation and have become well known in the valley of the sun and throughout Arizona. Our customers have the comfort of knowing Diamondback Plumbing will provide a warranty on all our plumbing work provided and we stand behind our quality workmanship.

The article ABS, PVC, PEX or Copper? Which is Better for your Home? was first published to website for Diamondback Plumbing

ABS, PVC, PEX or Copper? Which is Better for your Home? first appeared on:

Diamondback Plumbing

17423 N 25th Ave

Phoenix, AZ 85023

(602) 674-3255

Google Maps

Tips to Prevent Clogged Drains

If you take action early, you can avoid the inconvenience caused by clogged drains. Your plumbing system must work properly, and this means keeping the pipes and drains clear of any blockage. Here are some of the most common causes of blocked drains and how to prevent them.

Phoenix Arizona drain cleaning service

Garden Debris

Garden debris such as dead leaves and twigs are one of the main causes of clogs in drains and gutters. Always make sure no yard waste goes into a sanitary sewer system – do not wash dirt material of any sort down your drain into your sewer system.


Tree Roots

Leaky pipes and drains provide the moisture that tree roots love. As such, roots often extend their growth within pipes and drains and cause blockages. If there are already tree roots inside the pipes and drains, cutting them would be a temporary solution as the roots will just grow back. The best solution is to hire a licensed professional to properly camera detect the sewer line and locate exact root penetration location to provide a proper estimate to excavate and repair/ replace the bad section of piping.


Greasy Substances

Greasy substances can clog up pipes and drains, too. Don’t throw greasy substances like excess cooking oil down the drain. You can put greasy substances in a container or bottle and throw it in the trash can instead. If you fear that too much grease and or lard has made its way down the drain you will need to have a professional like Diamondback Plumbing provide a jetting service to properly scour flush your lines.


Hair Strands

Hair strands can become tangled and create a large ball of hair that works like a net. It traps other debris and can cause a blockage. To prevent hair from clogging the drain, always pick up your hair strands after bathing or showering. You can also use a strainer in the bathroom sink and bathtub.


Toilet Rubbish

Soap bits, cotton balls, toilet paper, Q-tips, and other toilet trash can also block your drain. So, don’t flush away your rubbish in the toilet. Put a trash can inside the bathroom, so you don’t have to throw your garbage into the toilet bowl.


Disregarding Blockages

Don’t ignore blocked drains. A minor issue can become a bigger problem if left neglected. This means spending a large amount of money on repairs. When the damage is serious, you may have to replace the pipes.

Here are other tips to prevent clogged drains.

  • For kitchen sinks with garbage disposals, you should use a drain strainer to keep food scraps out. You can also pour boiling water down the sink drain once a week to remove any grease or fat that may have accumulated inside the pipes. Pour the boiling water slowly and gradually.
  • For sinks with garbage disposals, running a stream of cold water will carry waste materials completely through your drainage system. Don’t put eggshells, potato skin, banana peels, and coffee grounds in the garbage disposal as these waste materials are sticky and thick and can cause blockages.
  • If you have a septic tank, you should have it inspected every 2 to 3 years. Ask your local health board about the rules on septic tank inspection in your area. Septic tanks must be pumped by experts on a regular basis. Doing it once a month can prevent septic backups.
  • Observe proper utility drain maintenance. Floor drains, pool drains, and laundry drains should be properly assembled. Open drains must be covered with strainers to prevent soap scraps and other solid items from falling in. Meanwhile, when floor drains are neglected or damaged, they may not work properly, thus preventing water from flowing down and causing flooding. Floor drains should be equipped with backflow prevention devices and protective straining plates.
  • Disposal drains are vulnerable to fats, greases, grits, oils, and other common causes of blockage. Fatty substances will solidify on the interiors of drains and when grits such as eggshells and coffee grounds stick to the grease, the pipes will get clogged. If you are using an older model of dishwasher, you should pre-rinse and scrape dishes from plates to prevent the kitchen drains from being clogged. Newer models of dishwashing machines are often attached to garbage disposals, so they can handle larger waste particles. However, to be safe, you should still scrape the plates of any leftover food before placing them in the dishwasher.

These are some of the most important things that you should keep in mind when it comes to preventing clogged drains. Properly working drains can save you from so much inconvenience and costly repairs. If you want to have your pipes and drains fixed, just call Diamondback Plumbing and let our team do the job for you. Our company has a team of expert plumbers that can fix your plumbing concerns quickly and efficiently. Diamondback Plumbing uses state-of-the-art tools for drain cleaning and we have experienced technicians that have dealt with these situations you can be assured the job will be done right the first time.

DiamondBack Plumbing
17423 N 25th Ave
Phoenix, AZ 85023
(602) 674-3255

The following article Tips to Prevent Clogged Drains was originally published on website

Tips to Prevent Clogged Drains first appeared on:

Diamondback Plumbing

17423 N 25th Ave

Phoenix, AZ 85023

(602) 674-3255

Google Maps

How to Properly Clean Your Kitchen Garbage Disposal

Your garbage disposal needs care from time to time. Cleaning your garbage disposal every day can eliminate and prevent bad odors. Periodic deep cleaning is also good for your garbage disposal. Follow these tips from Diamondback Plumbing and learn how to properly clean your garbage disposal.

Daily Cleaning

Daily cleaning will keep your garbage disposal in good condition while reducing its need for periodic deep cleaning. For this, you will need the following:

  • Dishwashing detergent
  • Hot water
  • Tiny scrub brush


  1. Pour hot water into your garbage disposal and sink, and add a coat of your dishwashing detergent to make a few suds.
  2. Switch on your garbage disposal and allow the water to flush through. The water mixed with detergent will loosen and eliminate the debris left in your garbage disposal.
  3. Turn off the disposal before doing this step. Remove the screen or drain, and use a tiny scrub brush to wash away grime and dirt. Put the screen or drain back to its original position.


Periodic Deep Cleaning

Periodic deep cleaning will remove dirt buildup and refine your grinders or blades. The number of times you need to do periodic deep cleaning will depend on how often you use your garbage disposal. Likewise, deep cleaning is not always necessary if you are keeping your garbage disposal thoroughly clean every day. If possible, perform periodic deep cleaning once a month. Here, you will need the following:

  • Baking soda
  • Ice cubes
  • Large-sized pot for water
  • Vinegar
  • Used/old toothbrush
  • Water


  1. Start removing the visible food particles in your garbage disposal.
  2. Get 2 ice cubes and let them run through your garbage disposal to loosen those food particles lingering on the grinders or blades. Ice cubes may also sharpen the blades of your unit.
  3. Get a ½ cup baking soda and pour it into your garbage disposal.
  4. Get a cup of vinegar and pour it also into the machine. The mixture inside your garbage disposal will dissolve and bubble while it expands. If applicable, cover your garbage disposal and the drain of your second sink.
  5. Leave the mixture set deeply for up to 10 minutes.
  6. Fill a big pot with water and allow it to boil.
  7. When the boiling water is ready, take away the covers of your garbage disposal and sink.
  8. Pour the hot water in your garbage disposal and let it run to eliminate the loosened fragments and debris.
  9. If possible, take away the splash guard and wash it carefully. Scrub the bottom using a used or old toothbrush.
  10. If the splash guard is hard to remove, try lifting each flap and brushing its bottom using the toothbrush. This way, you can easily eliminate the dirt buildup and the unpleasant smell.
  11. Put the splash guard back to its original position.

You may also run some citrus peels through your garbage disposal to have a refreshing scent in your kitchen. Scented oil is a good alternative for the citrus peels. Put a few drops of aromatic oil in your garbage disposal and leave it on for 2 to 3 hours before rinsing with water.

Tips for Maintaining Your Garbage Disposal

  • Fill your garbage disposal with biodegradable items only. Fibrous or starchy food items, rice, pasta, and coffee grinds can cause clogging in your machine.
  • Let your garbage disposal run for a longer time with every use.
  • Protect your drain from grease.
  • Cut the big slices of vegetables or fruits into tiny pieces before letting them run through your garbage disposal.

Proper care and regular maintenance will help you lengthen the life span of your disposal. If something goes wrong with your garbage disposal, contact Diamondback Plumbing right away.

One more thing always make sure to run water then turn on disposal then you put the scrapings in the disposal in that exact order to avoid clogging your line.

How to Properly Clean Your Kitchen Garbage Disposal See more on: Diamondback Plumbing & HVAC

How to Properly Clean Your Kitchen Garbage Disposal first appeared on:

Diamondback Plumbing

17423 N 25th Ave

Phoenix, AZ 85023

(602) 674-3255

Google Maps

Common Plumbing Problems

Find your shut-off valve

The most important thing you need to know about your home’s plumbing is where to shut off the water. If your home is supplied by municipal water, the water meter and main shutoff valve are often within close proximity to each other, so finding the meter is a good first step.

Water meters are often in an underground hatch near the street or along an easement between properties. Look along the edge of your property for a metal lid (like a small manhole cover) marked “water meter” or just “water.” You can usually remove the water meter hatch cover by unscrewing a single bolt.

Underneath, you’ll find a rotating valve similar to an outdoor spigot, or a valve with a metal flange. The latter may require a pipe wrench to operate. In either case, turn the valve clockwise until it stops to shut down the water supply.

Warning: Although you may need to do this quickly in an actual emergency, if you’re just testing you may need to first turn off the water intake valves to appliances like water heaters to ensure that your test does not cause any damage. Check your owner manuals on these devices and take appropriate steps before shutting off your home’s main water supply.

You may, of course, also have a water shut-off valve in your basement or crawlspace. Usually this would be along the pathway of the main water line and just inside the house.

Other shut-off valves

Each plumbing fixture, such as dishwashers, faucets, water heaters and toilets, will often have its own dedicated shutoff valve. For freestanding fixtures, such as toilets or pedestal sinks, the shutoff valve can be easily located on the water supply line between the floor or wall and the fixture. Kitchen sinks, dishwashers and cabinet-mounted sinks would normally have their shutoff valves under the kitchen sink.

Shutting off water to fixtures mounted flush against the wall — bathtubs, showers, etc — may be harder to do locally because the valves (if they exist) may be hidden behind drywall.

Of course, finding the valve is one thing; whether you can turn it off with your bare hand is another. Because they are so rarely used, these valves may be hard to turn without a wrench. Try loosening each of these valves with some household spray oil so you’ll be able to shut them off quickly if you ever need to.

Read Full Article Here: Common Plumbing Problems